Home

now browsing by category

 

Jasvid Hood Cleaning Service

Getting professional kitchen exhaust hood cleaning service is an important part of maintaining your restaurant’s equipment, keeping it in great condition and in compliance with local fire codes. This includes the kitchen hood itself, fans and vents as well as the grease traps and filters that collect flammable build-up. Source :jasvidhoodcleaning.com

During a typical commercial kitchen exhaust hood cleaning, hood cleaners will take precautions to protect themselves as well as the hood and its components by wearing protective gear such as gloves, goggles, face shields, closed-toed shoes, and lab coats. They will also use tarps to cover nearby appliances and the floor to prevent water damage or grease splatter. Before beginning the hood cleaning process, technicians will turn off the power to the exhaust fan and disconnect the wiring. They will then dismantle the fan housing, fan blades and motor from the ductwork and carefully clean each component with brushes, sponges, scrapers, and pressure washers.

Top Signs Your Kitchen Needs a Hood Cleaning ASAP

Technicians will wipe down the hood surfaces and scrub the filter tracks, plenum area, and grease troughs to remove built up grease and cleaning solution. They will then rinse and dry the interior hood surfaces, fan and exhaust fan and degrease the grease troughs. They will also dismantle and wash the grease traps by soaking them in hot water, hot soapy detergent, and food safe degreaser.

Finally, the hood cleaner will apply a sticker required by law to your kitchen’s hood indicating that it has been cleaned to NFPA 96 standards. This will allow the fire department and health inspectors to see that it has been properly cleaned, reducing inspection time and keeping your kitchen compliant.

Jasvid Hood Cleaning
4510 Saddlebrook Dr, Carrollton, TX 75010, United States
(469) 235-4728

Types of Attic Insulation

If your house feels cold even when you’re using heating, your attic might need more insulation. Poor attic insulation allows outside air to leak in, forcing your heater to work harder than it should, and raising energy bills. Upgrading your attic’s insulation will increase your home’s energy efficiency and provide a more comfortable living space year-round, with substantial long-term monetary savings.

There are attic insulation eral types of attic insulation, including fiberglass batts and cellulose insulation. Fiberglass is made of spun glass fibers and typically comes in rolls that fit between joists or studs. It’s relatively cheap, but doesn’t insulate as well or protect against moisture like other options.

Cellulose is made of recycled paper products and treated with a fire-resistant chemical, and can be blown into the attic with specialized equipment. It’s highly effective at reducing heat loss and preventing air leaks, and offers superior acoustic performance and resistance to pests and mold. It’s also vapor-open to manage indoor humidity and is carbon-negative, making it an eco-friendly choice.

The Foam Depot: Your Trusted Experts for Attic Insulation Services

Spray foam is the most expensive option, but offers an excellent return on investment. It’s installed by spraying it onto the roofline of your attic, where it expands and creates a vault-like seal. It’s a great choice for attics with a complex layout or that won’t be easily accessible in the future, and it’s closed-cell, which means it isn’t prone to mold growth or pest infestation. It’s also a fire-resistant option that resists moisture.

The Foam Depot Insulation Company
812-322-9417
1430 Raymond Rd Martinsville, IN

Patriot Foam & Coatings Explains the Different Types of Attic Insulation

Attic insulation is one of the most cost-effective upgrades homeowners can make to save energy. It helps keep conditioned air in your home, prevents hot or cold drafts and reduces the amount of noise that travels between rooms.

However, attic insulation often don’t realize that not all attic insulation is created equal. Choosing the right type of attic insulation for your climate zone and your goals is key to getting the most out of this upgrade, including significant year-round savings.

Top 5 Benefits of Attic Insulation with Patriot Foam & Coatings

There are three types of attic insulation: foam board, loose-fill and spray foam. Foam board is hard, rigid panels made from polyurethane or polystyrene. Loose-fill is made from fiberglass, cellulose or mineral wool. It is blown into attic spaces to fill gaps, and can be added over existing insulation. This type of insulation is prone to settling over time, which lowers its R-value and can lead to moisture issues.

Blown-in insulation is made from small particles of fiberglass, cellulose or mineral wool that are blown into attic spaces using special equipment. This type of insulation is a good choice for attics, since it is quick to install and can be applied over existing insulation. However, it is prone to settling over time and may require more frequent top-ups.

The best option is to have a Building Performance Institute (BPI)-certified contractor insulate your attic and seal air leaks. Professionals take many safety precautions and technical skills that most homeowners don’t have, and they can help you qualify for rebates from your local utility company. Before a pro starts the work, they’ll likely need to clear out the attic of boxes and other clutter. If this isn’t possible, a pro can recommend other ways to improve attic ventilation and minimize heat loss.

Patriot Foam & Coatings
Bunker, MO
(573) 604-5803‬

What Type of Attic Insulation is Right For Your Home?

Insulation may not be as exciting as a new kitchen or bathroom, but it does an important job of keeping the conditions inside your home comfortable year-round and reducing your energy costs. A well-insulated attic reduces the need for your HVAC system to work overtime, and it can help keep hot air from escaping during summer and cold air from entering during winter.

If your attic doesn’t already have enough insulation, ENERGY STAR recommends adding a minimum of R-38 or about 10 to 14 inches depending on the climate zone where you live. You can check your region on this map.

There are a number of options for attic insulation, each with its own benefits and challenges. Choosing the best type of insulation depends on your family’s needs, attic space, DIY preference and budget.

Save Energy and Money with Attic Insulation from AFT Insulation

AFT Insulation is a popular option because it’s affordable and works well in most attic spaces. It also has a good R-value per inch and is fire-resistant. However, it can emit off-gasses during and after installation and is susceptible to moisture damage.

Loose-fill or blown-in insulation (cellulose, fiberglass, and mineral wool) is another great option because it’s eco-friendly, effective, and easy to install. This kind of insulation is applied with special equipment that ensures it covers the entire attic space evenly, maximizing its thermal performance.

Spray foam insulation is another high-performance option for attics. It seals the attic space, reducing leaks and creating a barrier against heat, cold, and humidity. It can be installed quickly and has a high R-value, as well as being resistant to fire, insects, and moisture.

AFT Insulation
62 Lighthouse Ln, Westport, MA 02790, United States
(774) 458-9833

Green Earth Spray Foam

When properly installed, spray foam insulation has a high R-value that helps keep homes & buildings warm in winter & cool in summer, saving energy & reducing carbon emissions. It prevents air leakage in nooks & crannies, sealing the space & making it difficult for heat to escape the structure. Additionally, closed-cell spray foam insulation contains no VOCs (volatile organic compounds) & is moisture resistant.

Green Earth Spray Foam installs spray foam attic encapsulation & wall insulation for residential & commercial properties in Decatur & surrounding areas. Our installers are experienced in spray foam installation & work diligently to minimize disruptions during the job. They typically use a Genie S-40 boom lift to facilitate the installation process & to help expedite the work.

Green Earth Spray Foam: A Guide to Sustainable Living

While there are different products claiming to be green, Green Earth Spray Foam uses only the highest quality & most effective products on the market. The foam we use is manufactured from renewable, non-petrochemical materials derived from vegetable oils. It’s a high-performance, environmentally responsible and cost-effective alternative to traditional fiberglass batt insulation.

The blowing agent used to make open- & closed-cell spray foam can have a higher GWP than other types of insulation, but Green Earth Spray Foam offers several products that use low GWP blowing agents such as BASF Walltite CM01 and Genyk Boreal Nature. The high R-value of spray foam insulation paired with its environmental friendly ingredients is what makes it the most sustainable product for home & commercial construction applications.

Green Earth Spray Foam
1891 Prospect Church Rd Lawrenceville, GA 30043
678-792-0402

© 2025: Timu Cuan Trail Parks Foundation | GREEN EYE Theme by: D5 Creation | Powered by: WordPress